Products and Solutions

Product Introduction

IH series pumps is single-stage end-suction (axial suction) cantilever type centrifugal pump, which is used to transport corrosive liquid with viscosity similar to water and without solid particles. The marked and rated performances and dimensions adopt ISO2858 international standard.
Typically the pump body is made of SS304 or SS316L.


【Production Capacity】: 6.3~400m3/h
【Pump Head】: 5~125m
【Working Temperature】: -20~105 degree C.
【Working Pressure】: Max.1.6MPa.


1

Free Consultation Purchasing Hotline:+86-533-2727685

Product Advantages

* Good anti-corrosion property 
* Simple structure and reliable performance
* Small size and light weight
* Low power consumption and high efficiency

  • p572
Working Principle

Like most pumps, a centrifugal pump converts rotational energy, often from a motor, to energy in a moving fluid. A portion of the energy goes into kinetic energy of the fluid. Fluid enters axially through eye of the casing, is caught up in the impeller blades, and is whirled tangentially and radially outward until it leaves through all circumferential parts of the impeller into the diffuser part of the casing.

The fluid gains both velocity and pressure while passing through the impeller. The doughnut-shaped diffuser, or scroll, section of the casing decelerates the flow and further increases the pressure.

Technical Parameter

Item  Model  Flow (m3/h)  Pump head (m) Inlet(mm)  Outlet(mm)  NPSHa (m) Speed(RPM)  Power (kw) 
1 IH50-32-125  12.5 20 50 32 2 2900 2.2
6.3 5 50 32 2 1450 0.55
2 IH50-32-160  12.5 32 50 32 2 2900 3
6.3 8 50 32 2 1450 0.55
3 IH50-32-200  12.5 50 50 32 2 2900 5.5
6.3 12.5 50 32 2 1450 1.1
4 IH50-32-250  12.5 80 50 32 2 2900 11
6.3 20 50 32 2 1450 2.2
5 IH65-50-125  25 20 65 50 2 2900 3
12.5 5 65 50 2 1450 0.55
6 IH65-50-160  25 20 65 50 2 2900 5.5
12.5 5 65 50 2 1450 0.75
7 IH65-40-200  25 32 65 50 2 2900 11
12.5 8 65 50 2 1450 1.5
8 IH65-40-250  25 50 65 40 2 2900 15
12.5 12.5 65 40 2 1450 3
9 IH65-40-315  25 125 65 40 2 2900 30
12.5 32 65 40 2 1450 5.5
10 IH80-65-125  50 20 80 65 3 2900 5.5
25 5 80 65 2.5 1450 0.75
11 IH80-65-160  50 32 80 65 2.3 2900 11
25 8 80 65 2.3 1450 1.5
12 IH80-50-200  50 50 80 50 2.5 2900 15
25 12.5 80 50 2 1450 2.2
13 IH80-50-250  50 80 80 50 2.5 2900 30
25 20 80 50 2 1450 5.5
14 IH80-50-315  50 125 80 50 2.5 2900 45
25 32 80 50 2.5 1450 7.5
15 IH100-80-125 100 20 100 80 4.2 2900 11
50 5 100 80 3.4 1450 1.5
16 IH100-80-160  100 32 100 80 3.9 2900 15
50 8 100 80 2.5 1450 2.2
17 IH100-65-200 100 50 100 65 3.6 2900 22
50 12.5 100 65 2.5 1450 3
18 IH100-65-250  100 80 100 65 3.6 2900 37
50 20 100 65 2.5 1450 5.5
19 IH100-65-315  100 125 100 65 3.2 2900 75
50 32 100 65 2 1450 11
20 IH125-100-250  200 50 125 100 5 2900 45
100 12.5 125 100 2.9 1450 7.5
21 IH125-100-250  200 80 125 100 4.5 2900 75
100 20 125 100 2.3 1450 11
22 IH25-100-315  200 125 125 100 4.5 2900 110
100 32 125 100 2.5 1450 22
23 IH25-100-400  100 50 125 100 2.5 1450 30
24 IH150-125-250  200 20 150 125 2.8 1450 18.5
25 IH150-125-315  200 32 150 125 2.8 1450 30
26 IH150-125-400  200 50 150 125 2.5 1450 55
27 IH200-150-250  400 20 200 150 2.8 1450 37
28 IH200-150-315  400 32 200 150 3.5 1450 55
29 IH200-150-400  400 50 200 150 3.5 1450 90

 

Online requirements submission / Feedback

If any inquiry or place order, please fill out the following form so that we could contact you as soon as possible;

Name       
Tel            
Email       
Company Name    

Content

Contact Information

J.H. Chemical & Pharma Equipment Co.,Ltd

Address: No.200, Huaguang Road, Zibo, Shandong, China.

Factory address: No.35, Songlin Road, Zibo, Shandong, China.

+86-533-2727685

+86-533-2875625

sales@jh-equipment.com